ABSTRACT
Objective To study biomechanical effects of cannulated screws at different fixation angles on posterior malleolus fracture based on finite element method, so as to determine the best fixation method of cannulatedscrew. Methods The finite element model of ankle joint, including tibia, fibula, astragalus, corresponding cartilage and ligaments was reconstructed using CT images, and 1 / 2 posterior malleolus fracture model was established on the basis of verifying its validity. The biomechanical effects of cannulated screw fixation on posterior malleolus fracture fixation model were analyzed. Results Compared with 0°,5°,10°,20° fixation model, the 15° fixation model had the smallest displacement. The screw stress of 15° fixation model was lower than that of 5°, 10°, 20° fixation model, and higher than that of 0° fixation model. But when the screw fixation angle was 0°, the peak contact pressure of ankle joint was much larger than that of normal ankle joint, which was easy to cause traumatic osteoarthritis. Conclusions Cannulated screw is safe and effective for treating posterior malleolus fracture which is less than 1 / 2 fragment size. The displacement and stress of the model are different at different fixation angles of screws. When the fixation angle of screw is 15°, the biomechanical stability is the best, which can be used to guide clinical operation.
ABSTRACT
OBJECTIVE@#To investigate the clinical efficacy and advantages of Tianji orthopedic robot assisted cannulated screw internal fixation for femoral neck fracture.@*METHODS@#The clinical data of 41 patients with femoral neck fracture who underwent internal fixation with cannulated screws from January 2019 to January 2022 were retrospectively analyzed. According to different surgical methods, they were divided into Tianji robot group and traditional cannulated screw fixation group (traditional operation group). Among them, there were 18 patients in Tianji robot group including 8 males and 10 females with age of (56.00±4.22) years old, Garden typeⅠ (4 cases), type Ⅱ (11 cases), type Ⅲ (2 cases), and type Ⅳ (1 case). There were 23 patients in the traditional operation group, including 10 males and 13 females, aged (54.87±4.81) years old;there were 5 cases of Garden typeⅠ, 14 cases of type Ⅱ, 3 cases of type Ⅲ and 1 case of type Ⅳ. The operation time, intraoperative blood loss, fluoroscopy times, guide needle placement times, operation costs and other indicators were observed and compared between two groups. Harris score was used to evaluate hip joint function 12 months after operation.@*RESULTS@#The wounds of all patients healed in Grade A without complications. There were significant differences between two groups in terms of operation time, times of intraoperative fluoroscopy, times of guide needle placement, amount of intraoperative bleeding, and operation cost (P<0.05). All 41 patients were followed up for at least 12 months. The fractures of both groups were healed. There was no infection, screw loosening, fracture displacement and femoral head necrosis in Tianji robot group during follow-up;Screw loosening occurred in 2 patients in the traditional operation group during follow-up. At 12 months after operation, Harris hip joint function score of Tianji robot group was higher than that of traditional operation group in daily activity, lameness, joint activity score and total score (P<0.05).@*CONCLUSION@#Tianji robot assisted nail placement is a better method for the treatment of femoral neck fracture, which improves the surgical efficiency, is more accurate, has higher success rate of one-time nail placement, shorter operation time, less radiation, and has better hip joint function recovery after surgery.
Subject(s)
Male , Female , Humans , Middle Aged , Robotics , Retrospective Studies , Femoral Neck Fractures/surgery , Bone Screws , Fracture Fixation, Internal/methods , Treatment OutcomeABSTRACT
OBJECTIVE@#To investigate the application of 3D printing percutaneous surgical guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture.@*METHODS@#The clinical data of 12 patients with femoral neck fracture from March 2019 to March 2022 were retrospectively analyzed. Patients were divided into observation group and control group according to different operation plans, with 6 cases in each group. The observation group received percutaneous operation guide plate assisted closed reduction and hollow screw internal fixation, while the control group received closed reduction and hollow compression screw internal fixation. The operation time, intraoperative blood loss, fluoroscopy times, and Kirschner needle puncture times were compared between two groups. The location of screws were recordedon postoperative X-ray films, follow-up time, time of complete fracture healing, Harris score of hip joint and the incidence of complications were recorded on postoperative X-ray films.@*RESULTS@#The operation time of observation group (32.17±6.18) min was shorter than that of control group (53.83±7.31) min (P<0.05). The amount of intraoperative bleeding in the observation group (18.33±2.94) ml was less than that in the control group (38.17±5.56) ml(P<0.05). The times of fluoroscopy in the observation group (7.50±1.05) were less than those in the control group (21.00±4.82) (P<0.05). The number of Kirschner needle punctures (8.00±0.63) in observation group was less than that in control group (32.67±3.08) (P<0.05). The follow-up time was(12.88±0.74) months in observation group and (12.83±0.72) months in control group, there was no significant difference between two groups (P>0.05). One year after operation, Harris score of hip joint in the observation group was(82.00±4.52) points, while that in the control group was(81.00±3.41) points, there was no significant difference between two groups(P>0.05). The time of complete fracture healing in the observation group was (7.50±1.05) months, while that in the control group was (7.67±1.21) months, there was no significant difference between two groups(P>0.05). The parallelism of the screws in the observation group was (0.50±0.11) ° and (0.76±0.15) °, which were lower than that in the control group (1.57±0.31) ° and (1.87±0.21) ° (P<0.05). The screw distribution area ratio (0.13±0.02) cm2 in the observation group was higher than that in the control group (0.08±0.01) cm2 (P<0.05). No complications such as necrosis of femoral head, nonunion of fracture, shortening of femoral neck and withdrawal of internal fixation occurred in both groups.@*CONCLUSION@#The application of 3D printing percutaneous surgical guide plate improves the accuracy and safety of closed reduction and cannulated screw internal fixation for femoral neck fracture. It has the advantages of minimally invasive, reducing radiation exposure, fast and accurate, shortening the operation time and reducing intraoperative bleeding.
Subject(s)
Humans , Retrospective Studies , Treatment Outcome , Femoral Neck Fractures/surgery , Fracture Fixation, Internal , Bone Screws , Printing, Three-DimensionalABSTRACT
Cannulated Screw is a common internal fixation for the treatment of femoral neck fractures. However, the traditional implantation method has disadvantages such as inaccuracy and large radiation exposure. Based on the anatomical characteristics of the femoral neck and geometric principles, we develop a novel guide device for cannulated screws insertion. The cadaver experiment showed that it can improve the accuracy of cannulated screws implantation, reduce puncture attempts and the radiation exposure of doctors and patients.
Subject(s)
Humans , Bone Screws , Femoral Neck Fractures/surgery , Fracture Fixation, Internal , Robotic Surgical ProceduresABSTRACT
@#Salvage total hip arthroplasty (THA) may be required to manage femoral neck fracture implant failures, avascular necrosis and secondary hip arthritis. Cannulated cancellous screws can become stripped or incarcerated during the initial implantation and pose hardware removal issues. We present a novel technique for safe screw removal in a 62- year-old female patient with a painful right hip. She had undergone cancellous screw fixation for a fracture of the neck of femur ten years ago. There was avascular necrosis with screw cut out leading to secondary hip arthritis necessitating THA. Intra-operatively cannulated cancellous screw along the inferior femoral neck region was incarcerated. After posterior dislocation of the head, the neck was osteotomised, and the screw threads were exposed for possible extraction. However, the thickened femoral neck region with solid cortical bone prevented the screw disengagement in either direction. The screw along the femoral trochanter region was cut with a Harrington cutter and the remaining screw disengaged with careful removal of bony spicules and controlled anticlockwise rotations, to remove the screw in around fifteen minutes. Arthroplasty could be completed uneventfully thereafter. We could remove the screw while avoiding an iatrogenic fracture along the calcar region and excessive bone loss along the screw track. The femoral canal remained uncompromised. The anticipation of a difficult implant removal with a thorough understanding of the devices and techniques, is an invaluable asset to the operating surgeon. With a simple tool and novel technique in a difficult situation, we can save on operating time and minimise complications.
ABSTRACT
Objective To investigate biomechanical characteristics of femoral neck fracture with different reduction qualities. Methods Three cases of Sawbones artificial femoral models were selected, and two cases of Pauwel III femoral neck fracture were modeled. Three cannulated screws were inserted into the models in the form of inverted triangle to fix the fracture. Two cases maintained different reduction qualities (defined as Model 1 and Model 2). In the 3 third case, no modeling operation was performed (defined as intact model). Then the strain gauges were respectively pasted on regions of interest of the 3 femoral models. Finally, the femur model was applied with the vertical load on mechanical testing machine. Results When the displacement of femoral head reached 4 mm, the average load of intact model, Model 1 and Model 2 was (236.30±5.35), (196.57±3.56), (69.50±2.95) N, showing significant differences. When the displacement of femoral head reached 5 mm, the average load of intact model, Model 1 and Model 2 was (276.7±3.40)，(232.93±2.64)，(80.83±4.54) N, showing significant differences. Conclusions The lower the reduction quality of the femoral neck fracture, the weaker the ability of the femur to bear stress, the higher the probability of nonunion, re-fracture and femoral head necrosis in the process of postoperative rehabilitation.
ABSTRACT
Objective: To explore the changes of bone and risk of micro-fracture in femoral head after removal of cannulated screws following femoral neck fracture healing under the impact force of daily stress. Methods: A total of 42 specimens of normal hip joint were collected from 21 adult fresh cadaveric pelvic specimens. Wiberg central-edge (CE) angle, bone mineral density, diameter of femoral head, neck-shaft angle, and anteversion angle of femoral neck were measured. Then, the 3 cannulated screws were implanted according to the AO recommended method and removed to simulate the complete anatomical union of femoral neck fracture. The morphology of screw canal in the femoral head was observed by CT. Finally, the specimens were immobilized vertically within the impact device in an upside-down manner, and the femoral heads were impacted vertically. Every specimen was impacted at 200, 600, and 1 980 N for 20 times with the impacting device. After impact, every specimen was scanned by CT to observe the morphology changes of screw canal in the femoral head. Micro-fractures in the femoral head could be confirmed when there was change in the morphology of screw canal, and statistical software was used to analyze the risk factors associated with micro-fractures. Results: After impact at 200 and 600 N, CT showed that the morphology of screw canal of all specimens did not change significantly compared with the original. After impact at 1 980 N, there were protrusion and narrowing in the screw canal of the 22 femoral head specimens (11 pelvic specimens), showing obvious changes compared with the original screw canal, indicating that there were micro-fractures in the femoral head. The incidence of micro-fracture was 52.38% (11/21). logistic regression results showed that there was correlation between micro-fracture and bone mineral density ( P= 0.039), but no correlation was found with CE angle, diameter of femoral head, neck-shaft angle, and anteversion angle ( P>0.05). Conclusion: The micro-fractures in the femoral head may occur when the femoral head is impacted by daily activities after removal of cannulated screws for femoral neck fractures, and such micro-fractures are associated with decreased bone density of the femoral head.
ABSTRACT
BACKGROUND: Numerous studies have reported the effectiveness of platelet-rich plasma in promoting and improving bone healing. However, due to the limitations of methods, follow-up and study design, many orthopedicians still doubt the clinical effect of platelet-rich plasma combined with cannulated screw fixation in the treatment of fracture and nonunion. OBJECTIVE: To evaluate the difference in efficacy between platelet-rich plasma combined with cannulated screw fixation and simple cannulated screw fixation in the treatment of femoral neck fracture using meta-analysis system. METHODS: The Cochrane Library, PubMed, Wanfang Medical Network, China National Knowledge Infrastructure, and China Journal Full-text Database were used to search and collect clinical randomized controlled trials of platelet-rich plasma combined with cannulated screw fixation and cannulated screw fixation for the treatment of femoral neck fractures. Two reviewers independently evaluated the quality of the included studies, extracted data and checked each other. Meta-analysis was utilized to analyze the collected data with RevMan 5. 3 software. RESULTS AND CONCLUSION: (1) Seven clinical randomized controlled trials were selected for meta-analysis, totally 760 patients. There were 380 cases undergoing platelet-rich plasma combined with cannulated screw fixation and 380 cases undergoing cannulated screw fixation. (2) The meta-analysis showed that compared with the cannulated screw fixation group, fracture healing time was shorter [MD=-1. 86, 95%CI(-2. 97, -0. 75), P=0. 001]; healing rate was higher [OR=6. 51, 95%CI(3. 36, 12. 62), P < 0. 000 01]; necrosis rate was lower [OR=0. 25, 95%CI(0. 15, 0. 44), P < 0. 000 01]; Harris scores at 1, 3, 6, 9, and 12 months postoperatively were higher [MD=4. 95, 95%CI(4. 12, 5. 77), P < 0. 000 01; MD=19. 78, 95%CI(18. 45, 21. 11), P < 0. 000 01; MD=17. 16, 95%CI(10. 39, 23. 92), P < 0. 000 01; MD=12. 66, 95%CI(10. 60, 14. 71), P < 0. 000 01; MD=10. 17, 95%CI(5. 98, 14. 36), P < 0. 000 01] in the platelet-rich plasma combined with cannulated screw fixation group. (3) Platelet-rich plasma combined with cannulated screw fixation for femoral neck fracture is more effective than that of cannulated screw fixation alone. Combined treatment can accelerate the fracture healing of patients, improve the healing rate, reduce necrosis rate, and promote the recovery of postoperative hip joint function.
ABSTRACT
BACKGROUND: In recent years, some scholars have proposed the use of medial femoral neck support plate combined with cannulated screw internal fixation to treat Pauwels type III femoral neck fracture. This method can reduce the incidence of complications such as nonunion of the femoral neck fracture and femoral head necrosis. However, it is still controversial whether this treatment can accelerate fracture healing and reduce femoral head necrosis in clinic. OBJECTIVE: Meta-analysis was performed to evaluate the difference in the efficacy of femoral medial support plate combined with cannulated screw internal fixation and simple cannulated screw internal fixation for the treatment of Pauwels type III femoral neck fracture. METHODS: Cochrane Library, PubMed, Wanfang Medical Network, China National Knowledge Infrastructure, and China Journal Full-text Database were used to search for and collect the clinical Chinese and English literature of the trials regarding Pauwels III femoral neck fracture treated with internal femoral support plate combined with cannulated screw internal fixation and simple cannulated screw internal fixation. Two evaluators independently conducted quality evaluation, data extraction and cross-checking of the included studies, and finally performed meta-analysis on the collected data using RevMan 5.3 software. RESULTS AND CONCLUSION: (1) After screening, 5 related clinical trials were included, including 4 randomized controlled trials and 1 retrospective cohort study, for a total of 243 patients with Pauwels III femoral neck fracture. (2) Meta-analysis results showed that compared with simple cannulated internal fixation, operation time was longer [MD=23.19, 95%C/(8.32, 38.06), P=0.002], intraoperative blood loss was more [MD=83.48, 95%C/(32.08, 134.89), P=0.001], and healing time was shorter [MD=-1.56, 95%C/(-1.89, -1.24), P < 0.000 01], the incidence of complications was lower [RD=-0.07, 95%C/(-0.11, -0.02), P=0.003], and hip Harris score was higher [MD=7.39, 95%C/(3.18, 60), P=0.000 6] in the femoral medial support plate combined with cannulated screw internal fixation. However, there was no statistically significant difference in the excellent and good rate of hip function between the two treatments [OR=1.29, 95%C/(0.02, 74.86), P=0.90]. (3) In the treatment of Pauwels type III femoral neck fracture, compared with simple cannulated nail fixation, cannulated screws combined with medial support plate can shorten healing time, reduce postoperative complications and elevate postoperative Harris score.
ABSTRACT
BACKGROUND: Cannulated screw fixation is the first choice for the treatment of fresh femoral neck fracture. However, in the patients with bone defect, the mechanical conduction and stability of the proximal femur are obviously changed, which easily leads to the failure of internal fixation, nonunion or delayed healing of the fracture, so the study of biomechanics has important clinical significance. OBJECTIVE: To explore the biomechanical changes of proximal femur with posterior-inferior bone defect using finite element analysis, compare the biomechanical effect of cannulated screws with different configurations in treatment of adductive femoral neck fractures. METHODS: Original DICOM data of CT scan of proximal femur in an adult healthy male volunteer were obtained. MIMICS 10.01 software and Rhino3D NURBS software were used to make the models of femoral neck fracture with different degrees of posterior-inferior bone defects (no defect model, small defect model, medium defect model and large defect model). Two configurations of cannulated screws (inverted triangle and positive triangle) were used in four models. Mesh generation and material property assignment were conducted after assembly. The coupling relationship was established between the center and the surface of the femoral head by ABAQUS 6.12 software. The load and constraints of slow walking were applied to all models. RESULTS AND CONCLUSION: (1) The inner side of the femoral neck was subjected to compressive stress, and the lateral side was subjected to tensile stress for the non-defect model. The stress distribution of the femoral head was more uniform. With the increase of the degrees of posterior-inferior bone defect, the stress peak value of femoral head, femoral neck pressure side and tension side, and cannulated screw tail were increased gradually. (2) With the increase of the defect degree, the peak value of the stress on the pressure side of the cannulated screw increased gradually. In the middle and large defect models, the stress in the inverted triangle group was higher than in the regular triangle group (P 0.05). (3) With the increase of the defect degree, the peak stress on tension side of cannulated screw increased gradually. In the model of no defect and small defect, the stress in the regular triangle group was higher than in the inverted triangle group (P 0.05). (5) With the increase of the defect degree, the peak value of stress in the tail of cannulated screw increased gradually. In the small, medium and large defect models, the stress in the inverted triangle group was higher than in the regular triangle group (P 0.05). (6) Results suggested that different degrees of posterior-inferior bone defects could obviously affect the biomechanical properties of the proximal femur. For femoral neck fracture with no defect or lesser degree of defect, the biomechanical effect of inverted triangle was superior to regular triangle. For femoral neck fracture with big defect, the biomechanical effect of regular triangle was superior to inverted triangle.
ABSTRACT
Objective To compare differences in mechanical stability of intramedullary fibular allograft with cannulated screw (modified method) and cannulated screw alone (conventional method) for fixing young and middle-aged Pauwels Ⅰ, Ⅱ, Ⅲ femoral neck fractures. Methods Models of Pauwels Ⅰ, Ⅱ, Ⅲ femoral neck fracture fixed by conventional method and modified method were constructed. Stress distributions on weight-bearing area of the femoral cortical bone shell and the end of femoral neck fracture, as well as shear stress distributions on cortical bone shell of the femoral head and femoral neck fracture surface were analyzed, the maximum principal strain cloud maps of the femur in coronal position were drawn according to the predicted data, and the displacements of femoral neck fracture end between two groups were compared. Results The shear stress distributions on cortical bone shell of the femoral head in two directions (S12, S13) showed that femoral neck fractures fixed by modified method was superior or close to that by conventional method. Besides, the shear stress distributions on fracture surface of the femoral neck in two directions (S12, S23) showed that modified internal fixation was superior to conventional internal fixation. The displacements of femoral neck fracture end in Pauwels Ⅱ and Ⅲ fracture fixed by conventional method were greater than those by modified method and the displacements of Pauwels Ⅱ fracture fixed by conventional method were obviously larger than those of Pauwels Ⅱ fracture fixed by modified method. But Pauwels Ⅰ fracture fixed by modified method showed a larger displacement than that fixed by conventional method. Conclusions Modified method is more suitable for fixing femoral neck fracture with large angles (Pauwels Ⅱ and Ⅲ fracture), and conventional method is more suitable for fixing neck fracture with small angles (Pauwels Ⅰ fracture).
ABSTRACT
INTRODUCTION@#Syme amputation has been shown to have value in patients with diabetic foot infections, but it has inherent drawbacks. A potential alternative is the modified Pirogoff amputation. Our objective was to evaluate the outcome of modified Pirogoff amputation using internal fixation with 6.5-mm cannulated screws in the management of diabetic foot.@*METHODS@#This is a prospective study of 13 patients admitted from January 2012 to June 2015. Inclusion criteria were infection limited to the forefoot, presence of a palpable posterior tibial pulse and an ankle-brachial index of more than 0.7. Internal fixation of the calcaneum to the tibial was performed using two 6.5-mm cannulated screws under image intensifier control.@*RESULTS@#In ten cases, the wounds were healed at three weeks. Osseous union was observed in ten cases; the time taken for its occurrence was 2-5 months. Removal of screws was performed in five cases. Five cases developed technical complications of screw tract infection, with two cases having distal screw migration. Good results, defined as cases not requiring a below-knee amputation for two years postoperatively, were obtained in 10 (77%) cases. At the three-year follow-up, three additional cases required proximal amputation, leaving 7 (54%) cases with good outcomes.@*CONCLUSION@#Our prospective study showed that with careful selection of patients, good postoperative results can be obtained. There is a definite role for modified Pirogoff amputation in the management of diabetic foot problems.
ABSTRACT
PURPOSE: To identify the anatomic features for clinical applications through a computational simulation of the fixation of three cannulated screws for a femoral neck fracture. MATERIALS AND METHODS: Thirty cadaveric femurs underwent computed tomography and the images were transferred to the Mimics® program, resulting in three-dimensional proximal femur models. A three-dimensional scan of the 7.0 mm cannulated screw was performed to enable computerized virtual fixation of multiple cannulated screws for femoral neck fractures. After positioning the screws definitively for cortical support, the intraosseous position of the cannulated screws was evaluated in the anteroposterior image and axial image direction. RESULTS: Three cannulated screws located at the each ideal site showed an array of tilted triangles with anterior screw attachment and the shortest spacing between posterior and central screws. The central screw located at the lower side was placed in the mid-height of the lesser trochanter and slightly posterior, and directed toward the junction of femoral head and neck to achieve medial cortical support. All the posterior screws were limited in height by the trochanteric fossa and were located below the vastus ridge, but the anterior screws were located higher than the vastus ridge in 10 cases. To obtain the maximum spacing of the anterior and posterior screws on the axial plane, they should be positioned parallel to the cervical region nearest the cortical bone at a height not exceeding the vastus ridge. CONCLUSION: The position of cannulated screws for cortical support were irregular triangular arrangements with the anterosuperior apex. The position of the ideal central screw in the anteroposterior view was at the mid-height of the lesser trochanter toward the junction of the femoral head and neck, and the anterior and posterior screws were parallel to the neck with a maximal spread just inferior to the vastus ridge.
Subject(s)
Cadaver , Femoral Neck Fractures , Femur , Femur Neck , Head , NeckABSTRACT
Results: The operation time was 35-95 minutes (mean, 55 minutes), cumulative C-arm fluoroscopy time was 3-8 minutes (mean, 5 minutes), no iatrogenic vascular injury and pelvic organ damage occurred. Postoperative X-ray films at 2 days indicated that 2 cases of vertical shift and 2 cases of mild rotation were not completely corrected. Postoperative CT examination at 3 days indicated that 2 pubic joint screws broke through the obturator bone cortex. None of the pubic ramus screws entered into the acetabulum, but a screw of superior pubic branch broke through the posterior cortical of superior pubic branch, a screw of posterior ilium column broke through the medial bone cortex of the ilium, and no clinical symptom was observed. One patient suffered from wound infection in the pubic symphysis, then healed after 2 weeks of wound drainage, the other wounds healed by first intention. According to Matta criterion for fracture reduction, the results were excellent in 9 cases, good in 4 cases, and fair in 1 case with an excellent and good rate of 92.9%. All patients were followed up 8-24 months (mean, 14 months). All fractures healed at 4 months and restored to the normal walking at 6 months after operation, 3 patients suffered from slight pain in the sacroiliac joints and slight claudication when they were tired or walked for a long time and unnecessary for special treatment. One patient felt pain in the back of the iliac spine when he was lying down. During the follow-up, no screw loosening or other internal fixation failure occurred. At last follow-up, according to Majeed functional evaluation criteria, the results were excellent in 7 cases, good in 5 cases, and fair in 2 cases with an excellent and good rate of 85.7%.
ABSTRACT
Objective: To discuss the effectiveness of arthroscopic treatment of anterior cruciate ligament (ACL) tibial eminence avulsion fracture in adolescents by using double heads compressive cannulated screw fixation. Methods: Twenty-four patients with ACL tibial eminence avulsion fractures were treated by arthroscopic reduction and internal fixation with double heads compressive cannulated screw fixation between June 2014 and June 2017. There were 15 males and 9 females with an average age of 12.3 years (range, 5-18 years). The body mass index was 19.3-26.4 kg/m 2 (mean, 23.3 kg/m 2). The injury causes included traffic accident injury in 10 cases, sports injury in 8 cases, and falling injury in 6 cases. According to the Meyers-McKeever classification, there were 19 cases of type Ⅱ and 5 cases of type Ⅲa. All patients’ drawer test and pivot shift test were positive. The interval between injury and operation was 3-14 days (mean, 6.2 days). During the follow-up period, the fracture healing condition of patients were determined by X-ray examination; Lysholm score, International Knee literature Committee (IKDC) score, and Tegner score were used to evaluate the knee function. Results: Primary healing of incision was obtained in all patients after operation. All the 24 patients were followed up 6-32 months (mean, 16.4 months). At 6 weeks after operation, 3 patients had difficulty in knee flexion. After the release of the knee joint by manipulation, the knee joint function recovered normally at 6 months after operation. At last follow-up, the X-ray films showed that all the fractures healed and no epiphyseal dysplasia, knee joint deformity, or leg length discrepancy occurred. The Lysholm score, IKDC score, and Tegner score were improved from preoperative 44.3±5.4, 43.7±4.4, and 3.0±1.3 to postoperative 93.1±4.3, 94.6±3.3, and 8.1±1.2, the differences were all significant ( t=25.152, P=0.000; t=28.634, P=0.000; t=13.226, P=0.000). Conclusion: The arthroscopic reduction and internal fixation with double heads compressive cannulated screw in treatment of ACL tibial avulsion fracture (Meyers-McKeever type Ⅱ and Ⅲ) in adolescents has so many advantages, such as minimal trauma, simple operation, firm fixation, little effect on the epiphyseal plate, and has a good joint function recovery.
ABSTRACT
OBJECTIVE: Among the various sacropelvic fixation methods, S2 alar-iliac (S2AI) screw fixation has several advantages compared to conventional iliac wing screw. However, the placement of S2AI screw still remains a challenge. The purpose of this study was to describe a novel technique of free hand S2AI screw insertion using a K-wire and cannulated screw, and to evaluate the accuracy of the technique.METHODS: S2AI screw was inserted by free hand technique in sixteen consecutive patients without any fluoroscopic guidance. The gearshift was advanced to make a pilot hole passing through the sacroiliac joint and directing the anterior inferior iliac spine. A K-wire was placed through the pilot hole. After introducing a cannulated tapper along with the K-wire, a cannulated S2AI screw was installed over the K-wire.RESULTS: Thirty-three S2AI screws were placed in sixteen consecutive patients. Thirty-two screws were cannulated screws, and one screw was a conventional non-cannulated screw. Thirty out of 32 (93.8%) cannulated screws were accurately positioned, whereas two cannulated screws and one non-cannulated screw violated lateral cortex of the ilium.CONCLUSION: The technique using K-wire and cannulated screw can provide accurate placement of free hand S2AI screw.
Subject(s)
Humans , Hand , Ilium , Sacroiliac Joint , SpineABSTRACT
Objective To investigate the clinical effect of arthroscopy-assisted percutaneous cannulated screw fixation for Ideberg Ⅲ glenoid fractures.Methods A retrospective case series study was conducted to analyze the clinical data of 28 patients with Ideberg Ⅲ glenoid fracture admitted to the Honghui Hospital Mfiliated to Medical College of Xi'an Jiaotong University from January 2014 to January 2017.There were 19 males and nine females,aged 20-49 years [(32.5 ± 3.5)years].All patients were classified as Ideberg Ⅲ glenoid fractures.All patients were treated with arthroscopy-assisted percutaneous cannulated screw fixation.The length of incision,complications and range of motion of shoulder joint were recorded.The shoulder function was evaluated by University of California at Los Angeles (UCLA) score and visual analogue score (VAS) before and after operation.Results All patients were followed up for 24-36 months [(25.6-± 4.5) months].The incision ranged from 2.0 cm to 3.7 cm [(2.3 ± 0.8) cm].No infection,re-displacement or nonunion occurred.One year after operation,the results of range of motion were as follows:anterior flexion (160.7 ± 5.5)°,abduction (150.8 ± 6.8)°,and external rotation (38.4 ± 7.5) °.The mean UCLA score was increased from preoperative (7.2 ± 1.2) points to (33.5 ± 3.2) points (P ＜ 0.05),and the mean VAS score was decreased from preoperative (7.8 ± 3.2) points to (1.3 ± 0.5) points (P ＜ 0.05).Conclusion For Ideberg Ⅲ glenoid fractures arthroscopyassisted percutaneous cannulated screw fixation can relieve the pain and reduce complications,which is beneficial to the recovery of shoulder function.
ABSTRACT
OBJECTIVE: Among the various sacropelvic fixation methods, S2 alar-iliac (S2AI) screw fixation has several advantages compared to conventional iliac wing screw. However, the placement of S2AI screw still remains a challenge. The purpose of this study was to describe a novel technique of free hand S2AI screw insertion using a K-wire and cannulated screw, and to evaluate the accuracy of the technique. METHODS: S2AI screw was inserted by free hand technique in sixteen consecutive patients without any fluoroscopic guidance. The gearshift was advanced to make a pilot hole passing through the sacroiliac joint and directing the anterior inferior iliac spine. A K-wire was placed through the pilot hole. After introducing a cannulated tapper along with the K-wire, a cannulated S2AI screw was installed over the K-wire. RESULTS: Thirty-three S2AI screws were placed in sixteen consecutive patients. Thirty-two screws were cannulated screws, and one screw was a conventional non-cannulated screw. Thirty out of 32 (93.8%) cannulated screws were accurately positioned, whereas two cannulated screws and one non-cannulated screw violated lateral cortex of the ilium. CONCLUSION: The technique using K-wire and cannulated screw can provide accurate placement of free hand S2AI screw.
Subject(s)
Humans , Hand , Ilium , Sacroiliac Joint , SpineABSTRACT
Objective To explore the clinical efficacy of one-stage cannulated screw fixation in treatment of tibial avulsion fracture at the insertion of posterior cruciate ligament(PCL) under posterior direction version and in treatment of tibial avulsion fracture at the anterior cruciate ligament (ACL)under arthroscopy.Methods From January 2010 to June 2015,25 patients with tibial avulsion fractures of the posterior cruciate ligament combined with the anterior cruciate ligament in our hospital were retrospectively analyzed.Firstly,arthroscopic exploration was conducted in all patients in their horizontal position,aiming to observe whether combined injures existed or not and to confirm fracture fragments and the degree of tibial avulsion fractures of the cruciate ligaments.All patients recieved arthroscopic fragment fixation by using cannulated screws,then,were treated with a minimally posteromedial incision in the prone position by cannulated screw fixation.All knee joints were protected by adjustable orthopedic brace for 4-6 weeks.The clinical knee joint function of patients were measured by using International Knee Documentation Committee (IKDC) scoring scale and Lysholm scoring scale.The X-ray or CT image were used to evaluate healing process of the fractures.Results All patients were followed up for 6-24 months,the median follow-up time was 15 months.All fractures healed in one stage,time of fracture healing ranged from 9 to 24 weeks,and the median time was 12 weeks.The average IKDC scores at the finial follow-up were as follows:claudication (4.88±0.29)points,support (4.65±0.36)points,pain (4.78±0.49)points,swelling (4.88±0.52)points,squat (4.85±0.35)points,all were higher than those before operation,there were statistically significant differences when compared with those assessed before operation (P0.05).Conclusion The one-stage cannulated screw fixation in treatment of tibial avulsion fracture at the insertion of PCL under posterior direction version and in treatment of tibial avulsion fractures at the ACL under arthroscopy is easy and convenient to operate,which has the advantages of reliable fixation and satisfactory recent curative efficacy.
ABSTRACT
Objective:To analyze the clinical effect and influencing factors of closed reduction and percutaneous cannulated screw fixation in the treatment of femoral neck fracture in the adolescents, and to provide evidence for surgical treatment of femoral neck fracture in the adolescents. Methods:The clinical effect and influencing factors of 36 cases of femoral neck fracture treated by closed reduction and percutaneous cannulated screw fixation were analyzed. The time of operation, the time of fracture healing evaluated with X-ray image, the evaluation on the function after operation by Harris score of hip joint,and the occurrence of complications of the patients were observed.Results:All the cases were followed up for 6-24 months, average 16 months. One case of all patients had avascular necrosis of the femoral head, and accounted for 2.78% of all the patients;2 cases of all fractures were nonunion, and 5.56%.The remaining 33 cases were completely healed.The HHS-harris hip score results showed that 26 were excellent, 6 cases were good, and 2 cases were poor;the excellent and good rate was 88.89%.Conclusion:Closed reduction and percutaneous cannulated screw fixation in the treatment of adolescent femoral neck fracture is an effective program of operation;timing of operation, good reduction, and rigid internal fixation can decrease the femoral head necrosis and the incidence of complications.